Copper, brass and bronze supplier in Iran.
Find non-ferrous metals by alloy, product form and application. We help you prepare enquiries for copper, brass, bronze, aluminium and specialist copper alloys, with cutting and custom casting requirements considered alongside the material.
Choose your metal and product form
The following families are a starting point for an enquiry. Availability, exact grade, condition and dimensions are confirmed for each order.
Copper C11000
Material and application notes
Sheet, round bar and flat busbar. Cu-ETP is a high-conductivity copper used in electrical and thermal applications. State the required conductivity, temper, dimensions and edge condition; busbar sizing also needs an electrical and thermal design check.
Full technical reference (Persian)
Brass C37700 and B65 sheet
Material and application notes
Round bar, tube, flat bar and hexagonal profiles are offered for enquiry. C37700 is forging brass; B65 sheet must be specified separately. Composition, product standard and temper matter when choosing material for machining, forming or hot forging.
Full technical reference (Persian)
Bronze C83600 and C90800
Material and application notes
Enquire for rods, tubes, bushes or cast blanks. C83600 and the higher-tin C90800 differ in composition and properties. Give the bearing load, speed, lubrication and final dimensions before selecting a grade or machining allowance.
Full technical reference (Persian)
Aluminium bronze C95500
Material and application notes
Material enquiries for rods, bushes and custom cast components. Strength, wear behaviour and corrosion performance depend on casting quality and heat treatment. State whether as-cast or heat-treated properties are required; confirm them through the relevant test certificate.
Full technical reference (Persian)
CuCrZr copper C18150
Material and application notes
Chromium-zirconium copper for applications balancing conductivity and strength, including resistance-welding components. Supply condition and ageing treatment change the mechanical properties. Specify electrode geometry, operating conditions and the exact grade instead of using CuCrZr as the only description.
Full technical reference (Persian)
Beryllium copper C17510
Material and application notes
Cu-Ni-Be material for conductivity-focused engineering applications. C17510 belongs to a different family from high-strength C17200. Specify the intended component, strength and conductivity requirements, and material condition before discussing a substitute or ordering a machined blank.
Full technical reference (Persian)
Aluminium 7075 / 7000 series
Material and application notes
Round bar and plate enquiries for demanding lightweight components. The 7000 family includes multiple alloys; 7075 is one grade within it. Name the exact alloy, temper, thickness or diameter and test direction; welding and corrosion requirements need separate assessment.
Full technical reference (Persian)
Brass welding and brazing wire
Material and application notes
Specify the filler classification, diameter, base metals, joining method and flux requirements. The words brass wire do not identify one universal filler composition. Selection must match the process and the properties required in the finished joint.
Full technical reference (Persian)Specify the grade, condition and certificate
Buying by colour or a trade name is not enough. Specify the UNS grade, dimensions, quantity and delivery destination so the proposed material and quotation can be checked against your application.
Mechanical properties depend on product form, temper, casting process and test direction. A single tensile-strength or hardness value cannot describe every supply condition. Request a material test certificate (MTC) and state the acceptance standard before agreeing a substitution.
Reference examples: C83600 is a cast leaded red brass, commercially called phosphor bronze in Iran; it is not interchangeable with wrought CuSn8. C17510 is a Cu-Ni-Be alloy and must not be substituted for C17200 without engineering review. Aluminium 7075-T6 and 7075-T73 have different property profiles.
Services around your material
One clear enquiry helps align raw material, processing and inspection requirements.
Cut to size
Send the cutting list, quantity, tolerances, edge requirements and packaging instructions. Saw kerf and machining allowance should be considered when specifying the raw blank.
Custom casting
Provide a drawing, model or sample with alloy, quantity and acceptance criteria. Casting method, pattern requirements, shrinkage, machining allowance and inspection are reviewed before a production quotation.
Material selection support
Describe the load, speed, temperature, lubrication, corrosion exposure and mating material. Grade comparisons support selection; they do not replace the final engineering approval for your component.
From drawing to a clear quotation
Define the requirement
Choose the exact alloy and temper. Include a drawing or clearly stated raw dimensions, quantity and intended application.
Review the proposal
Ask for confirmation of available size, processing scope, inspection documents, price validity and lead time.
Confirm before fulfilment
Agree the final specification, quantity, documentation and collection or delivery arrangements before the order proceeds.
Questions before ordering
Can I request material for a destination outside Iran?
Include the destination city and country in your enquiry. Feasibility, documentation, packing, delivery scope and costs must be reviewed before confirmation. This page is not a promise of delivery to every destination.
Are all illustrated sizes currently in stock?
No. The images illustrate material families. Send the required grade, condition, dimensions and quantity to obtain a checked availability and price response.
Is C83600 the same as CuSn8 phosphor bronze?
No. C83600 is a cast copper-tin-lead-zinc alloy; CuSn8 is a different wrought tin-bronze family. Compare the specified standard, composition, manufacturing route and properties before substitution.
What should accompany a technical quotation request?
Material grade and temper, product form, dimensions with units, quantity, application, drawing if available, tolerances, certificate requirements and destination. Add machining allowance when buying a blank rather than a finished part.
Prepare your material enquiry
Complete the required fields to prepare a message. Review it in WhatsApp or Telegram before sending; this form does not submit an order or store your details on the website.
Illustrations represent material families; they are not proof of current stock. Price, production feasibility, lead time, documentation and delivery arrangements require a confirmed quotation.